ESI Racer's Edge Grips
ESI Silicone Grips conform to your hands for maximum grip and shock absorption.
Benefits of Silicon
ESI Racer's Edge Grips are best suited for the acknowledged weight weenie and thin grip lovers!
Engineered one side thicker for absorbing shock and vibration with the opposite side thinner for bulk-reducing comfort, combined with the best materials and the best production process this creates max shock absorption and grip, while maintaining the lowest weight possible and highest level of durability.
No tread or logos needed! Silicone has a memory; when you grab an ESI Grip you get a custom mold of your hand for a no slip ride every time.
These race proven lightweight grips are used by bicyclist all over the world.
Grip Shift or Custom Sizes
You can cut ESI grips with sharp scissors, utility knife, pipe cutter, etc. Hold next to your bar and cut leaving an extra 1/8" in length. We recommend Chunky style for a smooth transition on Grip Shift.
Clean handle bars. Press in End Caps. Using Rubbing Alcohol or Windex clean inside of ESI MTB grips, wet bar and inside of grip, slide onto bar. Rotate grip to have the Thicker side towards palm. Let dry for 24 hours.
Slide a screw driver with a dulled point (or something similar) under grip (careful not to scratch bar or stretch grip), squirt Rubbing Alcohol, Windex or water under grip, twist grip off bar. Clean inside of grip with Rubbing Alcohol or Windex and reinstall. If you have access to a compressor just blow them off.