VIEW ALPHABETICAL BRAND INDEX:

Intense M9 FRO Special Edition Frame

ITEM NUMBER: 175 INTSE3
ON SALE:
$2,999.98
MSRP:
$3,450.00
 
SAVE 13%

DH PRO

Intended Use: Professional level downhill racing

 
PRODUCT DESCRIPTION

Intense M9 FRO Special Edition Frame

The M series gravity chassis is perhaps the most celebrated in all of mountain biking. At one point in downhill history, if you weren't riding the original M1-or an M1 rebadged with your own sponsor's logo-you weren't on the podium. The latest incarnation, the M9 FRO, carries on that legacy of victory with a vengeance.

An unparalleled degree of adjustability makes the Intense Cycles M9 FRO the ultimate race weapon for any track.

G3 dropouts allow you to fine tune your geometry, wheelbase and chainstay length, and suspension is adjustable between 8.5 and 9.5 inches of smooth, bump-swallowing VPP travel via a flip-chip on the lower link. The leverage ratio of the rear shock is also adjustable via high and low mounting points on the front triangle. A burly 1.5-inch headtube features a pinchbolt to ensure it plays nicely with the top cups of angle-adjust headsets, allowing for even further tweaking.

It all rests within a frame that is an American-made work of aluminum art offering uncanny strength and stiffness.

With two decades of downhill DNA and racing development behind its headbadge, the M9 packs enough go-fast technical superiority to assure that the weakest link on any racecourse will be the rider.

So go ahead, take a gun to a knife fight-swing a leg over an industry icon and let gravity and adrenaline take their course while you race yours.

  • Custom florescent red paint
  • Cane Creek double barrel coil shock
  • Gold lower link, dropouts and hardware
  • Carbon-fiber upper link
  • Intended Use: Pro Level Downhill Racing
  • Modern World Cup Geometry
  • Adjustable Shock Rate
  • Adjustable Geometry, Head Angle, BB Height and Wheelbase Via G3 System
  • Recommended Fork Length: 203mm
  • Adjustable Travel: 8.5"/9"/9.5"
  • Full 1.5" headtube w/ pinch bolt for angle set compatibility
  • Seat Tube ID: 31.6mm
  • Bottom Bracket Shell: 83mm
  • Rear Wheel Spacing: 150x12mm Through Axle
  • ISCG '05 Mount
  • Rear Shock Eye to Eye and Stroke: 9.5" x 3"
  • Reducers: Front 41mmx8mm / Rear 34mmx8mm
  • Formed Mono Shell Main Triangle and Butted / Hydroformed Tubing
  • Made in the USA

GEOMETRY

Geometry

M9 Geometry Chart

Small

Medium

Large

A

Wheelbase

45.5-46.5"

46.5-47.5"

47.5-48.5"

B

Top Tube

22"

23"

24"

C

Chain Stay

17.25"/17.5"/17.75"

17.25"/17.5"/17.75"

17.25"/17.5"/17.75"

D

Head Tube

4.5"

5"

5"

E

Head Angle

64(+/- .5/1.0/1.5)°

64(+/- .5/1.0/1.5)°

64(+/- .5/1.0/1.5)°

F

Reach

15.5"

16.25"

17.25"

G

Stack

22.5"

23"

23.5"

H

BB Height

13.7-14.2"

13.7-14.2"

13.7-14.2"



Rider Height Frame Size Fit Chart

Height Chart

Please Note: These are only recommendations. Fit is also affected by inseam, torso length, reach, component selection and riding style.

There are no questions for this product at the moment.
Submit a question for this product
There are no reviews for this product at the moment.
Submit a review for this product