Thomson XC Carbon Flat Bar 31.8 730mm 6 degree
Thomson's Carbon flat bar for cross country enthusiast's offers a center clamp area allowing a flat riding position and a reversible 5mm drop for 29 inch bikes, or anyone that wanting to lower their cockpit. 6 degrees of back sweep for comfort and 730mm in width for plenty of leverage.
Thomson bars are made using 3 different fiber types with different tensile strengths and tensile modulus, including High Stregth carbon fibers. This helps allocate stiftness and flex were needed. They are molded using an EPS mandrel inside instead of a bladder to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. Thomson's carbon fiber is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. Are you ready for takeoff?
1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground.