INSIDE SEA OTTER 2013 | Part 2

The Link, Price Point’s finger on the pulse of the bike industry, delves deeper into the depths of Laguna Seca to continue bringing you coverage of the coolest new bikeswag from the Sea Otter Classic.

Giro Chamber

Served up hot ‘n’ fresh, the Chamber marks Giro‘s first entry into the downhill realm. Developed with none other than Aaron Gwin, the Chamber combines casual skate style with super-sticky vibram rubber soles. Flat and clipless-ready varieties are available, with the latter featuring a super-stiff sole. They’ve also lost considerable weight since debuting at Interbike in prototype form. An internal bootie,  EVA foam footbeds, impact-absorbing Poron XRD heel cups and velcro strap enhance comfort and fit.

 

Continental 27.5-inch Tires

Continental 27.5

Photo by Don Stefanovich

The German tiremaker introduced 27.5 (650b) versions of four of its most popular mountain treads. The Trail King (our personal favorite), Mountain King, X-King and Race King have all adapted to the tweener size. Currently only existing in 2.4 widths, Continental says most of the tires should be available in a full size run for 2014.

 

Troy Lee Designs Sam Hill D3 and Fresh A1 Colors

SeaOtter_2_2904

Photo by Don Stefanovich

Troy Lee Designs released much anticipated colorways of two of its most popular helmets, the D3 and the all-mountain A1. The D3 sees a fresh splash of color for the Sam Hill Signature edition while the A1 gets both a new metallic treatment and even a version with a matte finish.

SeaOtter_2_2910

Photo by Don Stefanovich

SeaOtter_2_2917

Photo by Don Stefanovich

The matte finish covers one of the original A1 paint schemes, but creates a stark yet welcome contrast to its metallic-flake siblings.

 

Optrix Barfly

SeaOtter_2_2886

Photo by Don Stefanovich

The new Barfly mount from Optrix makes mounting the XD5 to your handlebars a simple and versatile affair. It can be mounted for POV action, or flipped to lay the phone in a flat “landscape” mode if you’d rather use apps and training functions. 

SeaOtter_2_2889

Photo by Don Stefanovich

Optrix also made sure no one forgot its waterproof dunkability.

 

Marzocchi 380 C2R2 Titanium Fork and Moto C2R Shock

SeaOtter_2_3015

Marzocchi is replacing the 888 with the new 380 C2R2 Ti fork. Compatible with 26 and 27.5-inch wheels, the 200-millimeter 380 is a complete redesign with 38-mil stanchions, titanium spring, new arch and lowers, titanium pinch bolts, a hollowed-out axle and new internals. It trades in the open-bath design in favor of a “Dynamic Bleed Cartridge” inspired by the Italian company’s motocross forks, which it says will provide the plush, smooth feel of open bath with the consistency of a cartridge.  The DBC cartridge employs a one-way seal to let oil in. A spring-loaded piston acts a compensator; the piston moves up to make room as the damper cartridge fills with oil, and then back down to take up excess volume as oil exits the cartridge. Impressive—and it all weighs in at a tidy 6 pounds, 2 ounces.

SeaOtter_2_3017

Photo by Don Stefanovich

The ROCO isn’t going anywhere just yet, but the C2R will be the top-of-the-line DH shock going forward. With an eye on weight, the body is machined down to a minimalist design, and the 14-millimeter shaft and shock eyelet have been precision machined from a single piece of aluminum, decreasing weight and increasing strength.

Marzocchi doesn’t find the compression boost necessary, but offers the C2R both with and without for riders wanting increased tunability and bottom out. It all tips the scales at just 369 grams without the spring.

 

Bell Super

SeaOtter_2_2879

Photo by Don Stefanovich

Bell claims the Super splits the difference between heavy-duty downhill coverage and cross-country comfort and breathability. While that’s just another way of saying this is an all-mountain/enduro helmet, it seems to hit the mark in both form and function—not to mention style. The Super is also designed to readily accept goggles with an adjustable visor and guides.

 

Mavic Cosmic Carbone 40C

SeaOtter_2_3039

Photo by Don Stefanovich

Creating what it felt was the perfect carbon clincher wasn’t easy, but Mavic found a simple yet elegant solution.

SeaOtter_2_3031

Photo by Don Stefanovich

The French wheelmaker used aluminum inserts for increased strength and stiffness, giving the spokes a strong anchor point while keeping weight respectable at approximately 1,545 grams per pair.

 

Sock Guy Rainbows and Unicorns

SeaOtter_2_2873

We think these socks speak for themselves.

 by Don Stefanovich 

Finger_End

DON’T CALL IT A ‘CASE’ | Optrix turns iPhone into an HD action-sports cam that can take a beating and a bath

The Optrix XD5 and helmet mount in action.

We’ve all done it—fumbled with our iPhone during a ride to try and get “the shot” only to have it wind up face down in the dirt with a new spiderweb screen saver. And point of view with the same iPhone? Forget about it, unless you like riding one-handed.

Enter Optrix, a unibody polycarbonate housing that turns iPhone 4, 4S and 5 models into waterproof, wearable, wide-angle, high-definition, point-of-view action sports cameras. Given the HD capabilities of the iPhone and the fact that most users carry it just about everywhere, this seems like a no-brainer. So, why didn’t someone think of it sooner?

Well, they did.

“This isn’t our first rodeo,” John Willenborg, Optrix founder and CEO told The Link.

The first Optrix was designed around the iPod Nano in 2009.

Optrix has been a labor of love for about 4 years,” recalls Willenborg. “I used to be a semi pro motorcycle racer and used a GoPro frequently. One race weekend I was getting ready to head on track and I realized I left the GoPro SD card in my computer. My iPod Nano was just sitting there on the table and I decided to zip-tie it to the front of the motorcycle. The results were fantastic. The Nano was clearer, easier to use and I was able to watch the race back right on the device. The simplicity made so much sense I decided to start Optrix and create a better way to capture action video.”

The XD5 is not Optrix' first rodeo. Photo courtesy Optrix

The XD5 is not Optrix’ first rodeo.

In 2010 the company patented a clamshell design for the iPhone—then scrapped it.

“If there was a mistake to be made on the housings, chances are we made it,” Willenborg says, surprisingly candid about the dead ends in the extensive development process.

“The XD5 is the fourth generation of our XD Series, and it’s the result of countless hours of industrial design and engineering—making Optrix more than just a ‘phone case,’” says Willenborg. “We built prototypes, we tested, we found flaws, and reengineered until it was, in our eyes, perfect. There’s a reason our housing doesn’t look like anything else on the market: we’ve tried them all, and none compare to the durability and user friendliness of Optrix XD5.”

Among those flaws was the fact that the clamshell design required 15-percent more area—read more material—to be waterproof. More material equals more weight, and one of the goals—other than being waterproof and nearly indestructible—was to be lightweight, according to Willenborg. That lack of heft was achieved with a distinctive low-profile, monocoque, polycarbonate construction that still allowed it to take a beating—and a bath. During the marketing, er, testing phase, Optrix dropped its latest incarnation, the XD, from a second story window, threw it against a wall, ran it over with a full-size pickup truck and took it snorkeling in the Pacific, all—safely—while recording.

Not bad considering we’ve had friends mourn the loss of iPhones that met their demise during mundane activities such as getting out of the car or using the restroom. But we digress.

Out of the box

The Optrix XD5 includes everything you need—and a zip tie.

Out of the box, both the XD4 and XD5 include the main housing, an iPhone “sled,” a 175-degree wide-angle lens, a flat base mount, a curved base mount, a safety leash, a removable rail clip and a zip tie (hey, ya never know when you’ll need one).

The main housing—the true brainchild of Optrix R&D—is what makes it unique in the world of cases and mounts for both stand-alone POV cams and camera phones. Optrix claims it received inspiration for the monocoque, unibody construction of its housing from the driver “cocoons” designed to protect Formula 1 drives in fiery 200-mph crashes. It all sounds a bit dramatic, but regardless of the inspiration, the waterproof, nearly indestructible result is impressive. A “membrane” over the screen allows the user to retain full touchscreen functionality while remaining sealed and waterproof. The XD5 features an access door on the bottom of the housing to allow easy access for charging and headphone use while inside, though opening this port mitigates its waterproof properties.

The included iPhone “sled” serves as a sort of protective cartridge for inserting your iPhone into the main housing. Upon slipping an iPhone into the rubberized sled, we discovered it lives a surprising double life. The sled, as it turns out, makes a rather fine iPhone case for everyday use on its own. Bonus.

The wide-angle lens enhances the field of view, making the most of the iPhone’s HD recording abilities. Flat and curved base mounts with 3M industrial adhesive give you some mounting options to get started, but over 40 mounts are available, including our personal favorite, the chest mount. A sliding rail system means that you can easily attach and remove the main housing, allowing you to utilize its protective capacity whether or not it’s mounted and filming.

A safety leash and zip tie are thrown in for good measure.

In action

Head or chest? Life is about choices. Photo courtesy Optrix

Head or chest? Life is about choices.

Setup is easy. The sliding rail system allows for easy attachment to various mounts. The adhesive mounts work as well as any others we’ve used and the unibody construction keeps weight to a minimum. Other than being able to immediately watch footage you’ve just recorded, being able to immediately see what you’re recording on the iPhone’s screen makes for easy adjustment when mounting, taking the guesswork out of getting the right angle. There’s nothing worse than having a great run only to download your footage and find out your chest mount was pointed straight up your nose the entire time.

Once on the sled and in the case, things are pretty simple—but they weren’t simple enough for Optrix. The company developed propriety iPhone apps to maximize POV potential. The Optrix VideoSport is a free app featuring focus lock and adjustability for resolution and frame rate. The focus lock feature prevents the iPhone from “hunting” and constantly attempting to focus while in motion. At the time of press, motion-activated start/stop and a “minutes left” warning are slated for the next update.

An Optrix VideoPro gives users the ability to overlay telemetry data on their videos including speed, G-Force, lap times and a track map in addition to the functions of the VideoSport for $9.99 in the app store. Both also include oversized record, stop and play buttons for ease of use.

Final take

While it may seem counter-intuitive to bomb your favorite trail with an expensive iPhone anywhere but stowed safely in your pack or back in the truck, we’re looking forward to spending more time with and putting the Optrix through its paces and—most likely—testing its crash-test rating. While other dedicated POV cams likely aren’t going anywhere, the Optrix offers an ingenious and viable option for riders who already have a very capable iPhone, but don’t want to drop the extra coin for an expensive stand-alone unit.

by Don Stefanovich 

 

Finger_End