ESI Chunky Grips
ESI Chunky Grips at PricePoint.com
  Price Point:  $18.98
Color :   
Qty :  
Click Here to Check Availability
  Product Description
ESI Silicone Grips conform to your hands for maximum grip and shock absorption!

Benefits of Silicon
"Grip" - Wet or dry, your hands stay put! - Slip-proof, yet not sticky!
"Comfort" - Reduces Hand numbness - Fatigue - Arm pump
"Wear" - UV resistant - Non-Pores - Will not harden or fade
"Bar Adhesion" - No glue, hairspray, or lock-ons required! These grips will not throttle!
"Elements" - Withstands severe Temperatures - Climates - any condition you can throw at it!
"Maintenance" - Washable - Install/Remove with - Rubbing Alcohol - Windex - Compressed Air

ESI Chunky Grips are recommended for grip shift and riders looking for the best shock absorbing grip in the industry!

Design
ESI grips are designed and manufactured by a bicyclist to be the best.

Engineered
Engineered one side thicker for absorbing shock and vibration with the opposite side thinner for bulk-reducing comfort, combined with the best materials and the best production process this creates max shock absorption and grip, while maintaining the lowest weight possible and highest level of durability.

Memory
No tread or logos needed! Silicone has a memory; when you grab an ESI Grip you get a custom mold of your hand for a no slip ride every time.

Proven
These race proven lightweight grips are used by bicyclist all over the world.

Grip Shift or Custom Sizes
You can cut ESI grips with sharp scissors, utility knife, pipe cutter, etc. Hold next to your bar and cut leaving an extra 1/8” in length. We recommend Chunky style for a smooth transition on Grip Shift.

Installation
Clean handle bars. Press in End Caps. Using Rubbing Alcohol or Windex clean inside of ESI MTB grips, wet bar and inside of grip, slide onto bar. Rotate grip to have the Thicker side towards palm. Let dry for 24 hours.

Removal
Slide a screw driver with a dulled point (or something similar) under grip (careful not to scratch bar or stretch grip), squirt Rubbing Alcohol, Windex or water under grip, twist grip off bar. Clean inside of grip with Rubbing Alcohol or Windex and reinstall. If you have access to a compressor just blow them off.

Sold In Pairs
  Product Specifications
Weight: 71 grams

Grip Length: 5 1/8" - Standard

Installed Diameter: 32mm

1 Set of End Caps Included

Install ESI MTB grips by using Rubbing Alcohol, Compressed Air or Windex ONLY!
  Product Questions & Answers

Question:
If I order qty 1 of the ESI Chunky Grips will I get 1 grip or 2 grips?

Answer:
If you order qty 1 of the ESI Chunky Grips you will receive 1 pair of grips, 1 left and 1 right.
Item #
38047
Sette Ergo 2 Grips
MSRP $15.00
$5.98
Sette Signature Full Finger Gloves
MSRP $30.00
$14.98
ESI Racer's Edge Grips
$16.98
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Helpful Links
Email a Friend
Lowest Price Guaranteed
Product Help
Sizing Info
Shipping Info/Rates