|
|
Reelight SL120 2 LED Front & Rear Light Set - No Batteries Required |
|
|
| |
|
|
| MSRP: $65.00 |
Price Point:
$59.98
|
| Save 8% |
|
|
|
|
|
|
|
Product Description |
|
|
|
Reelight lights are daylight running lights for bicycles. With Reelight, you always have lights on your bike – day and night! The permanently fitted magnet lights flash when the wheels rotate and therefore work without any batteries. Reelight is a safe and solid solution that improves your freedom in traffic.
The lights are based on the electrodynamic induction principle, and work when you screw two magnets on the spokes and fix the light to the wheel’s hub. Electric current is then produced when the magnets pass the light, which incorporates a spool of copper wire. The light then flashes every time the wheel rotates. Simple, effective and ingenious.
Reelight’s patented magnet lights are a simple, durable and reliable solution. The lights are easy to fit – all you need is a screwdriver and an adjustable spanner. The self-sufficient induction dynamo, the high-quality light diodes and the powerful neodynium magnets guarantee quality and durability.
When cycling with Reelight, you feel no resistance when you tread on the pedals. Moreover, the lights are completely silent.
Your lights will stay flashing even when you stop at traffic lights etc. The light stores the energy in a built-in capacitor and keeps flashing for several minutes while the bicycle is stationary.
The LEDs have a lifespan of more than 100,000 hours, and the brackets are surface-treated to withstand the wind and weather for up to 7 years. The magnets will last almost indefinitely.
When riding in traffic, Reelight bike lights make you stand out. Whether it's day or night, summer or winter, Reelight makes you visible to everyone around you. Because they are permanently attached to your bike you don’t need be concerned about forgetting them or about them being stolen. And even when you stop, the back-up power feature assures you’ll never go dark. No batteries, no maintenance, no worries.
Studies have shown that the use of bicycle safety lights reduces the number of accidents by 40%.
The New Reelight SL120 2 LED Front & Rear Light Set - keeps flashing at stop overs.
• Built in capacitor - stores your energy
• Electronic circuit with constant flash frequency
• Same design as SL100
• No batteries - delivers its own energy source
• LEDs with long lasting durability
• Simple mounting on any bicycle
• Tested also under severe climate conditions
Reelight SL120 Power backup flash while your bike is in motion, and continue to flash for 2 minutes after you have stopped thanks to a built-in capacitor which stores current when you are cycling. SL120 flashes constantly at 120 flashes per minute – whatever your speed. Reelight doesn’t use batteries, but produces its own green energy using magnets attached to your bicycle spokes – pure induction power. Reelight is permanently mounted so you always have your lights with you. They remain on while your bike is in motion, ensuring you added safety in traffic – both day and night.
*Note: Fits most bicycles. The exception are bicycles with large disc brakes (larger than 160 mm in diameter) and bicycles with only a few spokes. If you are in doubt about whether Reelight lights can be fitted on your bicycle, either ask your local bicycle shop for advice or write to Reelight at
info@reelight.com.
|
|
|
|
|
|
Product Specifications |
|
|
|
 |
|
Set Includes: One set Reelight SL120 front and rear lights, four magnets, and two mounting brackets.
Weight: 350g
|
|
|
|
 |
|
|
Product Questions & Answers |
|

Question: How does the
Reelight SL120 2 LED Front & Rear
Light Set work?
Answer: The Reelight SL120
2 LED Front & Rear Light Set flashes
while you cycle and continues
flashing for up to 5 minutes after
you have stopped. This is thanks to
a built-in capacitor which stores
the power while you cycle. The SL120
flashes depending on how charged up
the capacitor is. It is important
that the capacitor is fully charged
the first time you use the lights.
It takes about 15 minutes of brisk
cycling before the light starts
flashing.
Question: On which
bicycles can you mount the Reelight
SL120 2 LED Front & Rear Light Set?
Answer: Reelight SL120 2
LED Front & Rear Light Set will fit
85 per cent of all cycles. The
exception is bicycles with large
disc brakes (larger than 160 mm in
diameter) and cycles with only a few
spokes. If you are in doubt about
whether Reelight lights can be
fitted on your bicycle, either ask
your local bicycle shop for advice
or write to Reelight at
info@reelight.com.
Question: Does it matter
having disc or roller brakes?
Answer: Yes – having disc
brakes will mean that the distance
between the light and the magnet
will be too large when you use the
original fitting. However, Reelight
offers a stainless extension bracket
on sale from their web shop that can
solve this problem. The extension
bracket for roller brakes enables
the lights to be fitted to cycles
with cooling fins for roller
brakes.
|
|
|
|
|
|
|
|