Sette Derro 2.0 SLX 4 Inch Dual Suspension Mountain Bike
Looking to take your trail and cross country riding to the next level but still love your first born? Then the all new Sette Derro 2.0 full suspension bike is just the ticket. Its four bar suspension is designed to climb efficiently and provide confidence when bombing nasty sections of singletrack. The component mix has been carefully selected to keep you ahead of your riding friends on the climbs and give you more braaaaap when going down!

The Derro boasts 4" inches of front and rear buttery smooth travel courtesy of Fox Racing Shox. Putting the power to ground is a mix of Shimano SLX/Deore components. Keeping your speed in check are Avid Elixir 3 brakes grabbing 160mm rotors. Keeping you firmly connected to the trail are Mavic Crossride wheels sporting award winning Kenda Nevegal tires.

Whether just getting into the sport or looking to get the absolute most for your money, the Sette Derro 2.0 Full Suspension Bike carves the perfect line to what you need.

The Derro 2.0 tips the scales at a start line ready 27.7 lbs in an 17" size.



Submit a Review

Click here to see all products by Sette

	Frame	7005 Aluminum
	Size(s)	Small, Medium, Large & Extra Large
	Fork	FOX 32 F100 RL Open Bath
	Rear Shock	FOX Float R
	Shifters	Shimano Deore M590
	Front Derailleur	Shimano Deore M590
	Rear Derailleur	Shimano SLX M662 SGS Shadow
	Shifter Cable/Housing	Shimano
	Brake Levers	Avid Elixir 3
	Front Brake	Avid Elixir 3 160mm Rotor
	Rear Brake	Avid Elixir 3 160mm Rotor
	Crankset	Shimano Deore M521 175mm
	Bottom Bracket	Shimano Deore
	Cassette	Shimano HG61 11-34T 9 Speed
	Chain	Shimano HG73
	Headset	FSA Orbit Z Zero Stack
	Handlebar	Sette XLR 31.8 Low Rise 660mm Width
	Grips/Tape	Sette S-Type Lock On
	Stem	Sette Edge 31.8 (SM/90mm, MD/100mm, LG/110mm & XL/110mm)
	Saddle	SDG Bel Air RL
	Seatpost	Sette APX 31.6 Black
	Wheelset	Mavic Crossride Disc Black
	Pedals	Not Included
	Front Tire	Kenda Nevegal 26" X 2.1 DTC 120TPI Folding Bead
	Rear Tire	Kenda Nevegal 26" X 2.1 DTC 120TPI Folding Bead
	Color(s)	White With Polished Stays
	Warranty	5 Years
	Weight	27.7 lbs(17" w/o pedals)

	Size	Small 15"	Medium 17"	Large 19"	XL 21"
A	Seat Tube	14.96"/380mm	16.93"/430mm	18.90"/480mm	20.87"/530mm
B	Effective Top Tube	22.05"/560mm	22.83"/580mm	24.02"/610mm	24.80"/630mm
C	Front Center	21.20"/538.4mm	21.82"/554.2mm	24.02"/582.4mm	24.80"/601.8mm
D	Head Tube Length	4.72"/120mm	4.72"/120mm	4.72"/120mm	5.31"/135mm
E	Stand Over Height	28.75"/730.25mm	29.53"/750mm	30.31"/770mm	31.10"/790mm
F	Head Tube Angle	70 deg	70 deg	70 deg	70 deg
G	Seat Tube Angle	72 deg	72 deg	72 deg	72 deg
H	Chainstay Length	16.73"/425mm	16.73"/425mm	16.73"/425mm	16.73"/425mm
I	Wheelbase	41.18"/1046mm	41.97"/1066mm	43.15"/1096mm	43.96"/1116.5mm
	Bottom Bracket Height	12.75"/32.385cm	12.75"/32.385cm	12.75"/32.385cm	12.75"/32.385cm
	Bottom Bracket Width	68mm	68mm	68mm	68mm
	Bottom Bracket Thread	English	English	English	English
	Seat Post Diameter	31.6mm	31.6mm	31.6mm	31.6mm
	Seat Clamp Diameter	34.9mm	34.9mm	34.9mm	34.9mm
	Front Derailleur Clamp Diameter	34.9mm, Top Pull	34.9mm, Top Pull	34.9mm, Top Pull	34.9mm, Top Pull
	Stem Length	90mm	90mm	100mm	100mm
	Crank Leght	175mm	175mm	175mm	175mm
	Maximun Tire Width	2.3"	2.3"	2.3"	2.3"

Does this bike come pre-assembled?
The Sette Derro 2.0 comes 95% assembled. The final steps to complete your bike are mounting the handlebars, pedals and front wheel and installing the seat and seatpost. The shifting and brakes are pre-assembled but will most likely require some fine tuning. Although you home mechanics may love the idea of putting your own bike together, to be covered under the manufacturer's warranty Sette USA requires that your bicycle be assembled by a qualified, professional bicycle mechanic.

What tools will be needed to assemble my bike?
Here are the tools required for the assembly of your bicycle:

2, 3, 4, and 5mm Hex (allen) Wrenches

Pedal Wrench (15mm)

For adjustments and routine maintenance, it will also be handy to have the following:

8mm Hex (Allen) Wrench

Philips Head Screwdriver

Besides the included general manual there are also comprehensive instructional guides for every component found on your bicycle. These are filled with valuable information and we strongly suggest that you hang on to these for future reference.

Will this bike need a follow up tune-up? And when?
Yes, this bike will need a follow up tune up. After the initial assembly and fine tuning of your bike, it will be necessary to perform routine follow up maintenance. Depending on how often you ride and the intensity of the terrain, we highly recommend that after a break-in period of approximately one month that you perform a thorough tune up. WE CANNOT STRESS THIS ENOUGH! This is the most important tune up that your bike will ever receive.

Why? All bikes break-in, no matter how much they cost! Cables stretch, bolts loosen, spokes tension changes, brakes and derailleurs go out of adjustment; all normal behavior, especially when a bike is new. After performing that first tune up, everything tends to settle in and your bike will usually require less frequent adjustments. A timely tune up on a new bike will help you get many years of reliable performance.

How do I get service for my bike?
If you have any questions at all, do not hesitate to contact Price Point. As an authorized Sette USA reseller, Price Point is prepared to answer any questions you may have. If you require routine maintenance and repair, Sette USA and Price Point recommend that you bring your bike to your local qualified, professional bicycle mechanic.

What size bike do I need?
Sette has provided a size chart to help determine what size bicycle you should purchase (see the tab above, under "Fit Guide").

Some of the road bikes and frames feature what is known as a "compact" frame geometry. These do not necessarily follow traditional measurements and will feature a shorter seat tube and greater standover height. Using the fit guide and the effective top tube will give an accurate comparison to bikes with traditionally measured geometries.

Indications that you may require an alternative size to what is recommended in the Fit Guide:

Limited range of motion - often, when someone has suffered an injury, or has certain physical limitations or development issues due to their personal medical history, it may result in limited ranges of motion.

If you fall at the extreme of either end of the Fit Guide's size spectrum (i.e. tall/short).

If you are confident that, proportionately speaking, you have very short/long torso or legs for your body height.

In those cases, you may need to modify certain components on your bicycle. Contact Price Point and our staff of knowledgeable experts will be glad to assist you in achieving the perfect fit.

Are there any specific torque values when assembling my carbon frame and bicycle?

Yes, there are. When tightening any bolt on a carbon, or carbon clamped, part, a certain level of common sense is required. They only need to be tightened to the point of being firm, and to where the clamped part is being securely held. NO FURTHER! Over-tightening will potentially crush the carbon, damaging the part to the point where it should be replaced. DO NOT RIDE ANY CARBON PART THAT IS DAMAGED!

If you own a torque wrench, use it! The guidelines below, measured in Newton Meters, will ensure years of reliable, safe performance from your carbon frames and parts.

Seat Post Binder - 7-8N.m. The torque spec for the bolt itself is 12N.m but you risk breaking the seatpost and/or the frame seat tube if locking the clamp over 8N.m.

Headset Cap - There is no standard measurement on top caps, just make sure to secure it enough to draw together all the parts in the steering area; fork, spacers, and stem so that there is no play in them. Typically this is 3-5N.m.

Stem Handlebar Clamp - 6N.m if your stem has 5mm bolts.

Still have a question about this product?