|
|
|
|
 Site Index |
 |
|
|
|
|
|
|
 |
| |
|
|
|
|
|
| |
|
Azonic Surround Sound Helmet
Designed for the riders that rock! Azonic Surround Sound Helmet has a built in surround sound system that doesn’t restrict outside noise.
Compatible with most MP3 and CD players. 11 ventilation holes, high density ABS shell, and heavy duty retention straps make this helmet safe and practical as well as being a rockin' sound system on the go!
 Click here to see all products by Azonic
|
|
|
|
|
| |
|
Giro Atmos Road Helmet 2007
On Sale Now! Was $149.98 Now $129.98
Good Until 07.17.08
Giro Atmos Road Helmet '07 features superior technology, Tour de France-proven performance and leading style are why so many elite riders count on the Atmos. If you want a premium helmet for the speed and thrill of wide-open roads, this is the one.
Roc Loc 4 Defined – The Giro Atmos Road Helmet features the Roc Loc 4 Fit system. It is the world’s finest. It features separate tensioning and positioning adjustments plus a soft rubber over-molded fit belt that hugs your head in luxury.
In-Mold Technology Defined - In-Mold Technology is the process of fusing a tough outer microshell to a helmet’s internal EPS liner. By fusing the shell with the liner, In-Mold helmets are reinforced in crucial area around vents and ribs. This makes the Giro Atmos Road Helmet light, cool and tough.
Wind Tunnel Ventilation Defined - Wind tunnel ventilation is Giro’s proprietary system of internal channels and active vents that force cool. Fresh air over and around your head while exhausting heat and stale air out. It’s a difference you can see and feel with the Giro Atmos Road Helmet – every time you ride.
Rib Cage Defined - Giro Atmos Road Helmet features Giro’s new Rib Cage combining the integrity of their internal Roll Cage with an external series of carbon-reinforced ribs. Together they create a whole new level of reinforcement – one that’s lighter, tougher and cooler than ever before.
 Click here to see all products by Giro Helmets
|
|
|
|
|
| |
|
Giro Monza Road Helmet 2007
Giro Monza Road Helmet '07 has race-bred styling and cool performance and was made for life in the fast lane. Sleek and sophisticated, it's the perfect choice for riders with a passion for style and an eye for value.
Roc Loc 4 Defined – The Giro Monza Road Helmet features the Roc Loc 4 Fit system. It is the world’s finest. It features separate tensioning and positioning adjustments plus a soft rubber over-molded fit belt that hugs your head in luxury.
In-Mold Technology Defined - In-Mold Technology is the process of fusing a tough outer microshell to a helmet’s internal EPS liner. By fusing the shell with the liner, In-Mold helmets are reinforced in crucial area around vents and ribs. This makes the Giro Monza Road Helmet light, cool and tough.
Wind Tunnel Ventilation Defined - Wind tunnel ventilation is Giro’s proprietary system of internal channels and active vents that force cool. Fresh air over and around your head while exhausting heat and stale air out. It’s a difference you can see and feel with the Giro Monza Road Helmet – every time you ride.
Click here to see all products by Giro Helmets
|
|
|
|
|
| |
|
Giro Animas Helmet 2007
Giro Animas Helmet '07 offers aggressive styling and high-caliber performance features matched to massive vents that were made for epic endurance challenges and tough terrain. If you live and breathe for long rides, this is the helmet for you.
Roc Loc 4 Defined – The Giro Animas Helmet features the Roc Loc 4 Fit system. It is the world’s finest. It features separate tensioning and positioning adjustments plus a soft rubber over-molded fit belt that hugs your head in luxury.
In-Mold Technology Defined - In-Mold Technology is the process of fusing a tough outer microshell to a helme’s internal eps liner. By fusing the shell with the liner, In-Mold helmets are reinforced in crucial area around vents and ribs. This makes the Giro Animas Helmet light, cool and tough.
Wind Tunnel Ventilation Defined - Wind tunnel ventilation is Giro’s proprietary system of internal channesl and active vents that force cool. Fresh air over and around your head while exhausting heat and stale air out. It’s a difference you can see and feel with the Giro Animas Helmet – every time you ride.
POV Visor Defined - The Giro Animas Helmet uses Giro’s Point of View (POV) visor. It features Giro’s patented internal clutch, which allows 15 degrees of vertical adjustment and creates a connection that prevents the visor from rattling and coming loose over rough roads and trails.
Roll Cage Explained:
Roll Cage is a super tough nylon reinforcement molded directly into the EPS foam layer of Giro’s best helmets. It provides an extra measure of strength and integrity that you’ll never notice, unless you need it.
Click here to see all products by Giro Helmets
|
|
|
|
|
| |
|
Giro E2 Mountain Helmet 2007
Giro E2 Mountain Helmet '07 packs incredible cooling power and top-of-class features into a rugged, compact design made specifically for mountain biking. Whether you're attacking the singletrack or cruising through the great wide open, it's a proven winner.
Roc Loc 4 Defined – The Giro E2 Helmet features the Roc Loc 4 Fit system. It is the world’s finest. It features separate tensioning and positioning adjustments plus a soft rubber over-molded fit belt that hugs your head in luxury.
In-Mold Technology Defined - In-Mold Technology is the process of fusing a tough outer microshell to a helmet’s internal EPS liner. By fusing the shell with the liner, In-Mold helmets are reinforced in crucial area around vents and ribs. This makes the Giro E2 Helmet light, cool and tough.
Wind Tunnel Ventilation Defined - Wind tunnel ventilation is Giro’s proprietary system of internal channels and active vents that force cool. Fresh air over and around your head while exhausting heat and stale air out. It’s a difference you can see and feel with the Giro E2 Helmet – every time you ride.
POV Visor Defined - Giro E2 Helmet uses Giro’s Point of View (POV) visor. It features Giro’s patented internal clutch, which allows 15 degrees of vertical adjustment and creates a connection that prevents the visor from rattling and coming loose over rough roads and trails.
Click here to see all products by Giro Helmets
|
|
|
|
|
| |
|
Bell Ghisallo Road Helmet 2007
Bell Ghisallo Road Helmet '07 features 17 huge vents to usher cool air through interior ventilation channels, a Fusion In-Mold Microshell and bottom wrap, and Bell's one-hand micro-adjustable GPS fit system, this 11.3-ounce beauty is a proven winner.
Fusion In-Mold Microshell
In-molding is the process of bonding the helmet’s Microshell to its EPS foam layer to provide a sturdier, more solid helmet. The EPS foam is shot into the thin Microshell cap when it is in the mold—thus the name—rather than formed separately and taped on later. This process was pioneered by Bell and is now the industry-wide standard for all high-end helmets. It’s now standard on all Bell adult and child helmets.
In-Mold Bottom Wrap
In-Mold bottom wraps bring a new level of durability, solidity and aesthetics to helmets. By bonding Microshell material to the lower half of the helmet, In-Mold bottom wraps cover what on most helmets is a less durable, exposed EPS foam.
Clear GPS Fit System
For a glove-like fit, nothing beats Bell's exclusive Geared Positioning System (GPS). Offered on our marquee helmets—Ghisallo, X-Ray, Furio and Influx, —GPS delivers the ultimate one-hand adjustment for superior fit and comfort. Simply turn the dial to click in to the perfect custom fit.
Internal Reinforcement
In order to maximize venting and minimize bulk, high-end helmets like the Sweep, Ghisallo and X-Ray now feature internal reinforcements. These composite skeletons fortify helmets the same way rebar makes concrete stronger. This allows for bigger vents, more advanced styling and lighter weight, while still meeting stringent safety standards.
Channeled Ventilation
Specially designed ventilation channels on the interior of the helmet's liner bring cool air in through the front, pass it over the head and flushes warm air out of the rear ports. You'll find some form of this feature on almost all Bell helmets, but our higher end helmets feature deeply sculpted channels that keep air moving whether you're bombing it at 30 mph, or huffing it uphill at single digit speed.
Cam-Lock Levers
Bell's Cam-Lock strap levers make it easy to adjust the straps around your ears. Simply open the cam…position comfortably and close the lever. Done.
Registered Graphics
Getting helmet graphics to hit the right spot on the helmet without distorting or warping is more challenging than most people realize. It’s why you see many of our competitors only doing helmets in solid colors or with very simple graphics. Bell designers have pioneered methods for registering graphics, so that we can make some of the most graphically complex and visually appealing helmets in the world.
 Click here to see all products by Bell Helmets
|
|
|
|
|
| |
|
Bell Furio Road Helmet 2007
Hot Deal!
Good Until 07.17.08
Bell Furio Road Helmet '07 provides hi-fi thrills at a low-fi price. The Furio features Bell's Fusion In-Mold Microshell, 20 air moving, internally channeled vents and their GPS fit system.
Fusion In-Mold Microshell
In-molding is the process of bonding the helmet’s Microshell to its EPS foam layer to provide a sturdier, more solid helmet. The EPS foam is shot into the thin Microshell cap when it is in the mold—thus the name—rather than formed separately and taped on later. This process was pioneered by Bell and is now the industry-wide standard for all high-end helmets. It’s now standard on all Bell adult and child helmets.
GPS Fit System
For a glove-like fit, nothing beats Bell's exclusive Geared Positioning System (GPS). Offered on their marquee helmets—Ghisallo, X-Ray, Furio and Influx, —GPS delivers the ultimate one-hand adjustment for superior fit and comfort. Simply turn the dial to click in to the perfect custom fit.
Internal Reinforcement
In order to maximize venting and minimize bulk, high-end helmets like the Sweep, Ghisallo and X-Ray now feature internal reinforcements. These composite skeletons fortify helmets the same way rebar makes concrete stronger. This allows for bigger vents, more advanced styling and lighter weight, while still meeting stringent safety standards.
Channeled Ventilation
Specially designed ventilation channels on the interior of the helmet's liner bring cool air in through the front, pass it over the head and flushes warm air out of the rear ports. You'll find some form of this feature on almost all Bell helmets, but our higher end helmets feature deeply sculpted channels that keep air moving whether you're bombing it at 30 mph, or huffing it uphill at single digit speed.
Cam-Lock Levers
Bell's Cam-Lock strap levers make it easy to adjust the straps around your ears. Simply open the cam…position comfortably and close the lever. Done.
Registered Graphics
Getting helmet graphics to hit the right spot on the helmet without distorting or warping is more challenging than most people realize. It’s why you see many of our competitors only doing helmets in solid colors or with very simple graphics. Bell designers have pioneered methods for registering graphics, so that we can make some of the most graphically complex and visually appealing helmets in the world.
Click here to see all products by Bell Helmets
|
|
|
|
|
| |
|
Bell Sweep XC Helmet 2007
Bell Sweep XC Helmet '07 picks up where its road racing brethren (the Sweep R) left off and adds Bell's Variable Position Visor (VPV) to the mix. The VPV allows for 15 degrees of vertical adjustment by using an imbedded clutch mechanism that holds the visor firmly at the desired angle, but allows for easy, on-the-fly changes. Couple this with the 20 breezy vents, Bell's signature GPS Fit System, Fusion In-Mold Microshell and bottom wrap, internal reinforcements and clicked-in graphics and you have a helmet that's destine to go from box to podium in no time flat.
VPV Adjustable Visor
Available only on Bell’s top-of-the-line mountain helmets, the Variable Position Visor allows for 15 degrees of horizontal adjustment by using an imbedded clutch mechanism that holds the visor firmly at the desired angle. Changing the VPV’s angle just takes a simple tug in the desired direction.
Fusion In-Mold Microshell
In-molding is the process of bonding the helmet’s Microshell to its EPS foam layer to provide a sturdier, more solid helmet. The EPS foam is shot into the thin Microshell cap when it is in the mold—thus the name—rather than formed separately and taped on later. This process was pioneered by Bell and is now the industry-wide standard for all high-end helmets. It’s now standard on all Bell adult and child helmets.
In-Mold Bottom Wrap
In-Mold bottom wraps bring a new level of durability, solidity and aesthetics to helmets. By bonding Microshell material to the lower half of the helmet, In-Mold bottom wraps cover what on most helmets is a less durable, exposed EPS foam.
Clear GPS Fit System
For a glove-like fit, nothing beats Bell's exclusive Geared Positioning System (GPS). Offered on their marquee helmets—Ghisallo, X-Ray, Furio and Influx, —GPS delivers the ultimate one-hand adjustment for superior fit and comfort. Simply turn the dial to click in to the perfect custom fit.
Internal Reinforcement
In order to maximize venting and minimize bulk, high-end helmets like the Sweep, Ghisallo and X-Ray now feature internal reinforcements. These composite skeletons fortify helmets the same way rebar makes concrete stronger. This allows for bigger vents, more advanced styling and lighter weight, while still meeting stringent safety standards.
Channeled Ventilation
Specially designed ventilation channels on the interior of the helmet's liner bring cool air in through the front, pass it over the head and flushes warm air out of the rear ports. You'll find some form of this feature on almost all Bell helmets, but our higher end helmets feature deeply sculpted channels that keep air moving whether you're bombing it at 30 mph, or huffing it uphill at single digit speed.
Cam-Lock Levers
Bell's Cam-Lock strap levers make it easy to adjust the straps around your ears. Simply open the cam…position comfortably and close the lever. Done.
Registered Graphics
Getting helmet graphics to hit the right spot on the helmet without distorting or warping is more challenging than most people realize. It’s why you see many of our competitors only doing helmets in solid colors or with very simple graphics. Bell designers have pioneered methods for registering graphics, so that we can make some of the most graphically complex and visually appealing helmets in the world.
Click here to see all products by Bell Helmets
|
|
|
|
|
|
|
|
|
| |
|
Bell Metropolis Helmet 2007
Bell Metropolis Helmet '07 features reserved metropolitan styling, high-end features and unparalleled adaptability make the Metropolis the ultimate lid for city and suburb alike. An innovative set of optional accessories allows the helmet to be customized for all conditions, from wet to cold to dark and everything in between. Starting with Bell's Fusion In-mold construction for superior durability the Metropolis includes 16 vents with Channeled Ventilation for great air flow, a one-hand-adjust GPS fit system, a removable Blade visor and easy setting Cam-lock Levers for quick strap adjustments. It also features a few firsts the in-mold SoftShell bottom wrap is made of a supple yet durable rubber that protects the helmet's lower from the dings and wear of everyday use while its rear strap allows riders to add standard flasher lights for better visibility. With the optional Flip Mirror, Winter Kit, and Rain Shield the Metropolis easily and seamlessly adapts to its environment, whatever that may be.
Fusion In-Mold Microshell
In-molding is the process of bonding the helmet’s Microshell to its EPS foam layer to provide a sturdier, more solid helmet. The EPS foam is shot into the thin Microshell cap when it is in the mold—thus the name—rather than formed separately and taped on later. This process was pioneered by Bell and is now the industry-wide standard for all high-end helmets. It’s now standard on all Bell adult and child helmets.
GPS Fit System
For a glove-like fit, nothing beats Bell's exclusive Geared Positioning System (GPS). Offered on their marquee helmets—Ghisallo, X-Ray, Furio and Influx, —GPS delivers the ultimate one-hand adjustment for superior fit and comfort. Simply turn the dial to click in to the perfect custom fit.
Channeled Ventilation
Specially designed ventilation channels on the interior of the helmet's liner bring cool air in through the front, pass it over the head and flushes warm air out of the rear ports. You'll find some form of this feature on almost all Bell helmets, but our higher end helmets feature deeply sculpted channels that keep air moving whether you're bombing it at 30 mph, or huffing it uphill at single digit speed.
Blade Visor
Bell's Blade visor mixes dramatic looks with top-notch functionality. Horizontal I-beam pins keep the visor in place with minimal intrusion on the helmet surface. Bell ellipse logo plugs are included to give the helmet a seamless look when the visor is detached.
Cam-Lock Levers
Bell's Cam-Lock strap levers make it easy to adjust the straps around your ears. Simply open the cam…position comfortably and close the lever. Done.
Click here to see all products by Bell Helmets
|
|
|
|
|
| |
|
Bell Venture Helmet 2007
Bell Venture Helmet '07 is a top-notch features at a bottom rung price is what the Bell venture is all about. Features Bell's Fusion In-Mold construction, ErgoDial fit system, easy-to-adjust Cam-Lock levers, 23 vents, and a snap-in visor.
Fusion In-Mold Microshell
In-molding is the process of bonding the helmet’s Microshell to its EPS foam layer to provide a sturdier, more solid helmet. The EPS foam is shot into the thin Microshell cap when it is in the mold—thus the name—rather than formed separately and taped on later. This process was pioneered by Bell and is now the industry-wide standard for all high-end helmets. It’s now standard on all Bell adult and child helmets.
ErgoDial
The ErgoDial Fit System brings one-handed adjustments to our Universal Fit helmets. A simple press of the button and slide of the dial brings firm, snug and comfy stability.
Snap-In Visor
Bell's Snap-In visor provides all the eye shading you could need in an easy to adjust and detach format.
Cam-Lock Levers
Bell's Cam-Lock strap levers make it easy to adjust the straps around your ears. Simply open the cam…position comfortably and close the lever. Done.
PinchGuard Buckle
Bell's PinchGuard buckle is specially designed to prevent kids from pinching their neck when they secure their helmet.
Click here to see all products by Bell Helmets
|
|
|
|
|
| |
|
Fox Flux Helmet 2008
Fox makes the world's best motocross helmets and people have been asking them for years to make a bike helmet. Well, the wait is finally over. Introducing the next evolution in bike helmets - the Fox Flux Helmet '08. Fox has taken their expertise in MX helmet design and used this knowledge to build the world's best trail riding helmet. The Fox Flux Helmet is designed for minimum weight and maximum protection while still providing the ultimate in comfort. Venting ports for airflow and breathability. Removable and washable inner comfort liner pads.
CPSC approved for off road cycling (NOT approved for motor vehicle use).
 Click here to see all products by Fox Racing
|
|
|
|
|
| |
|
RockGardn Blacklite Full Face Helmet 2008
All-new for 2008: the RockGardn Blacklite Helmet!
By using advanced, aerospace-grade thermoplastic for the shell, Rockgardn has created a sub-three pound helmet that's about half the cost of a composite helmet of comparable weight. Rubberized matte finish actually incorporates Latex into the lacquer, which helps resist visible scratches and makes the entire surface act as a goggle gripper. Plush inner lining is removable and washable. Meets or exceeds DOT and European ECE standards. Comes with drawstring helmet bag.
 Click here to see all products by RockGardn
|
|
|
|
|
| |
|
O'Neal MX Monster Helmet
O'Neal MX Monster Helmet
• Full Pro Factory MONSTER / O'NEAL graphics
• Full venting for improved aerodynamics and overall cooling
• Complete interior lining with genuine Savoir Suede padded liner that is completely removable, washable and wicks away sweat
• Rubber mud deflector for roost protection
• State of the art designed Aerodynamic shell and visor
• Exceeds SNELL, DOT, ECE and AS standards
• Each helmet comes with a full lined helmet bag to protect your lid while traveling
• Factory Helmet same as used by Factory Kawasaki’s Tim Ferry
|
|
|
|
|
| |
|
Troy Lee Designs D2 Carbon Phobia Helmet 2008
Astonishingly light in weight and incredibly strong, the D2 Carbon helmets consist of 60% carbon fiber, 20% aramid, and are then reinforced with 20% fiberglass. Finally, the D2 Carbon helmet features a new uni-weave carbon fiber outer surface. All D2 Carbon helmets include titanium visor screws plus a high-end TLD SE Helmet Bag.
D2 Helmets
Formula 1-like aerodynamics and ingenious technical features put the D2 helmets among the most advanced helmets in all of bicycle racing. Engineered for the dramatically different disciplines of mountain bike, downhill, BMX boarder-X and other extreme bike sports, the highly protective and stylish D2 is also worn into battle by many NASCAR pit crews including the championship-caliber #24 Team DuPont, and #20 Team Home Depot outfits.
All D2 helmets are created by using aerospace technology. A multi-layer construction process, pre-preg materials and a high pressure curing technology are all called into action to create the industry's premier helmet.
The D2's flow-through ventilation system includes four intake and exhaust ports that work in unison to maximize cool air transfer over the rider's head. A fully interchangeable, washable, MX-style padded liner as well as a D-ring strapping system combine to create a plush, custom fit. All D2 helmets come with a helmet bag, a fit-kit, and an owner's manual. D2 helmets meet or exceed safety approval rating requirements from CSPC, ASTM (BMX and downhill), and DE.
 Click here to see all products by Troy Lee Designs
|
|
|
|
|
| | |
