| |
|
Axo Chute Bang Tango Full Face Helmet
On Sale Now! Was $149.98 Now $99.98
Good Until 07.15.08
Chute: Bang Tango
3.2 lbs. Fiberglass construction.
• Snell 2005 / DOT Approved.
• Removable and washable liner and cheek pads.
• Shatter resistant, aerodynamic visor is attached to the helmet in 3 locations.
• Machined Aluminum and PU molded visor washers and bolts.
• 3 piece molded intake vent attached to the front of the helmet.
• Molded debris deflector nose guard is removable.
• Molded intake scoops on the cheeks and exhaust vents on the crown of the helmet.
• Clear coated graphics.
• Multi layer base coat color.
• Pressure molded Polystyrene liner is tested to fit and stay secured in helmet.
• Stainless steel D ring chin strap system.
• Unique materials and construction ensure lower interior noise.
 Click here to see all products by Axo Apparel |
|
|
|
 |
| |
|
Fox Flux Helmet Black 2007
The Fox Flux helmet 2007 is a new pursuit for the company. It's a helmet that combines the freestyle shape with cross country ventilation, taking the best from both worlds into a unique skid lid that looks good on the trails, on the ramps, in the parking lot, even riding down the street. The freestyle shape is best seen from behind, where the helmet has a familiar curve in addition to extending lower than most cross country helmets. The XC heritage is best seen up front, with the visor and big air scoops work together to help channel air flow over the head. A first for helmets is the spoiler atop the rear of the lid. Inspired by motocross, it channels the discharge air flow to keep the helmet streamlined, which means fast. 20 vents let the air come and go as it pleases. The Fox Flux helmet also uses a Detox secondary retention system.
CPSC approved for off road cycling (NOT approved for motor vehicle use).
 Click here to see all products by Fox Racing
|
|
|
|
|
| |
|
Hadley DH Front 20mm Hub
Outfit your DH or FR bike with the best hubs in the world. Built to handle anything you can throw at them. The replaceable and adjustable sealed cartridge bearings insure super smooth rolling, bullet proof strength and long life. For use with 20mm thru axle style forks only!
|
|
|
|
|
| |
|
Hadley DH Rear 12mm Hub
Outfit your DH or FR bike with the best hubs in the world. Built to handle anything you can throw at them. The rear hub uses two adjustable cartridge bearing, and a lightweight three-pawl titanium freehub body for ultra fast engagement. For use with 12mm bolt on DH and FR rear drop outs.
|
|
|
|
|
| |
|
Gusset 1-ER Single Speed Conversion Kit
Gusset 1-ER Single Speed Conversion - Make the Easy Switch
Quit playing around with cog spacers. The Gusset 1-ER Single Speed Conversion kit makes it easy to switch to single speed. The CNC machined aluminum spacers offer lateral support and the built-in offset optimizes chainline. Supplied w/ 16 & 18t cogs and lockring. The Gusset 1-ER is will work with 8/9 speed cassette hubs. For best performance please use a 8 speed or Single Speed Specific Chain.
Click Here to see more of our ever growing Single Speed Parts Department.
|
|
|
|
|
| |
|
DT Swiss Center Lock (IST) Adapter
Adapts center lock rotor mount hubs to accept International Standard 6-bolt. This adaptor can be installed onto all DT Swiss center lock hubs(should fit most other brands)
Only for disc with max. 2.2mm thickness and 203mm diameter! Will not work with Shimano Saint hubs or 2005 Hope Mon Series rotors.
|
|
|
|
|
|
|
|
|
| |
|
Hope Pro2 Front Hub
The Hope Pro2 Front Hub is constructed of CNC 2014-T6 aluminum with sealed cartridge bearings. The Pro2 Front Hub is convertible between 20 x 110mm and 9 x 100mm.
|
|
|
|
|
| |
|
Hope Pro2 Rear Hub
The Hope Pro2 Front Hub is constructed of CNC 2014-T6 aluminum with 5 sealed cartridge bearings, 4 pawl engagement, and 35 tooth ratchet ring. The Hope Pro2 Rear Hub is convertible between 10 x 135mm and 10/12 x 135mm.
The 12mm hub does not come with the 12mm axle.
|
|
|
|
|
| |
|
Shimano XT M756 6 Bolt Disc Hub
Tradition and Evolution
Deore XT® has established a tradition as the globally recognized standard in high performance
components. The component group continues to evolve to keep pace with the changing demands
of the latest bicycle designs and riding styles.
Deore XT® has established a tradition as the globally recognized standard in high performance components. The group continues to evolve to keep pace with the changing demands of the latest bicycle designs and riding styles. With Dual Control Levers™, Hollowtech II® and compact disc brake design, Deore XT® continues that tradition.
While the grade of materials and the surface treatment of the races may change between groups, one thing is constant. Shimano hubs exclusively use a cup and cone bearing system in all of its hubs. Cup-and-cone bearings offer greater strength than sealed cartridge bearings due to their ability to displace lateral and vertical loads more effectively for super smooth rotation in real world riding conditions. Cup-and-cone bearings also allow for easier maintenance, adjustability and serviceability.
Shimano XT M756 6 Bolt Disc Hub features smooth rotation, double contact sealing, Center Lock System compatibility, rubber cap for center lock mount, and a cup & cone bearing.
|
|
|
|
|
| |
|
Shimano Hone M600 Hub
Affordable All-Mountain & Enduro MTB Components
At a more affordable price point, Hone will give you the the best All-mountain / Enduro MTB components for the buck. With an innovative mounting system that fixes the rear derailleur directly to the rear hub axle, bent derailleur hangers are a thing of the past. Dual Control™ levers are also a part of the Hone® component line. Just like all Shimano MTB systems, Hone® works with and has a Rapidfire® shift lever set.
While the grade of materials and the surface treatment of the races may change between groups, one thing is constant.
Shimano hubs exclusively use a cup and cone bearing system in all of its hubs. Cup-and-cone bearings offer greater strength than sealed cartridge bearings due to their ability to displace lateral and vertical loads more effectively for super smooth rotation in real world riding conditions.
Cup-and-cone bearings also allow for easier maintenance, adjustability and serviceability.
Shimano Hone M600 Hub features Cup & Cone bearings, Center Lock system compatibility, disc brake compatibility, and an improved sealing system.
|
|
|
|
|
| |
|
Shimano Dura-Ace HB-7800 32-Hole Rear Hub
Performance without compromise
Three key words have emerged as the theme for the DURA-ACE® system: Speed, Smooth and Strength. Speed and Smooth result in effortless shifting, improved braking operation, enhanced ergonomics and an attractive feeling and design. Strength is focused on the critical need for lightweight without sacrificing rigidity, durability or precision. "100% Power Transmission" is the goal pursued by the fusion of these three concepts.
Ride Dura-Ace® to see why Lance has ridden to 7 Tour de France victories aboard Dura-Ace® components.
While the grade of materials and the surface treatment of the races may change between groups, one thing is constant.
Shimano hubs exclusively use a cup and cone bearing system in all of its hubs. Cup-and-cone bearings offer greater strength than sealed cartridge bearings due to their ability to displace lateral and vertical loads more effectively for super smooth rotation in real world riding conditions.
Cup-and-cone bearings also allow for easier maintenance, adjustability and serviceability.
Shimano Dura-Ace HB-7800 Rear Hub is a super lightweight, 10-speed compatible, smooth rolling, 32 Hole hub featuring Double Contact Sealing, Stainless Steel Balls, and user-friendly Dish Distance.
|
|
|
|
|
| |
|
White Industries ENO Eccentric Disc Hub
The demand for creative and functional single speed components has increased significantly over the last several years as the industry has witnessed an increased interest in both road and off road single speed riding. Several different single speed hubs were designed to accommodate the needs of various bicycles and component requirements. Bikes with vertical dropouts require a means to tension the chain. Chain tension can be addressed three ways by utilizing a chain tensioner, an eccentric bottom bracket, or with White Industries’ Eccentric ENO rear hub. The eccentric rear hub allows the rider to adjust the chain tension by simply rotating the elliptical axle ends up and back in the dropouts whereby the chain pulls into tension. The hub axle bolts are then secured to the frame and the bike is ready. It is easy, clean, and simple. When using a disc brake with the White Industries ENO Eccentric Disc Hub you will also need to use the White Industries ENO Eccentric Disc Brake Adapter (sold separately). The Disc ENO is designed to accept a six bolt disc brake rotor on the non drive side of the hub. The ENO hubs are made in the USA.
“…What is there to say? They’re light, simple, shiny and smooth. Bearing life has been fine so far, and they haven’t made any funny noises. We used a disc front, and a standard non-disc rear. They are available, however, in both disc or non-disc options, as well as a rear ENO eccentric style, which allows for clean adaptation of vertical-dropout-equipped-bikes to singlespeed use without tensioners.” Ferrentino, Mike. “Style in Spades” Bikemag.com. http://www.bikemag.com/gear/drivetrain/032806_white/
Click Here to see more of our ever growing Single Speed Parts Department.
 Click here to see all products by White Industries
|
|
|
|
|
| |
|
White Industries ENO Eccentric Standard Hub
The demand for creative and functional single speed components has increased significantly over the last several years as the industry has witnessed an increased interest in both road and off road single speed riding. Several different single speed hubs were designed to accommodate the needs of various bicycles and component requirements. Bikes with vertical dropouts require a means to tension the chain. Chain tension can be addressed three ways by utilizing a chain tensioner, an eccentric bottom bracket, or with White Industries’ Eccentric ENO rear hub. The eccentric rear hub allows the rider to adjust the chain tension by simply rotating the elliptical axle ends up and back in the dropouts whereby the chain pulls into tension. The hub axle bolts are then secured to the frame and the bike is ready. It is easy, clean, and simple. The standard ENO hub is freewheel compatible. The ENO hubs are made in the USA.
Click here to see all products by White Industries
“…What is there to say? They’re light, simple, shiny and smooth. Bearing life has been fine so far, and they haven’t made any funny noises. We used a disc front, and a standard non-disc rear. They are available, however, in both disc or non-disc options, as well as a rear ENO eccentric style, which allows for clean adaptation of vertical-dropout-equipped-bikes to singlespeed use without tensioners.” Ferrentino, Mike. “Style in Spades” Bikemag.com. http://www.bikemag.com/gear/drivetrain/032806_white/
Click Here to see more of our ever growing Single Speed Parts Department.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Sette DH 20mm 32 Hole Hub
The Sette DH 20mm 32 Hole Hub is the answer to all of your down hill-front wheel needs. It features an International Standard 6 bolt disc mount, and allows use with a 20mm thru axle and 32 hole rim. It weighs 249g and the heavy-duty cartridge sealed bearings will keep you rolling smoothly drop after drop.
Click here to see all products by Sette
|
|
|
|
|
| |
|
White Industries H2 Road Hub
Front On Sale Now! Was $109.98 Now $99.98
Rear On Sale Now! Was $269.98 Now $259.98
Good Until 07.17.08
White Industries’ newly designed H2 hubs are lightweight and designed specifically for road riding. They have been engineered with both function and performance in mind. The H2 hub features a lightweight aluminum axle in the front hub and a thin walled steel axle in the rear hub. White Industries have also redesigned both the front and rear hubs shells to maximize aerodynamic efficiency. Even more unique to their products, they continue to utilize titanium as the preferred material choice for the free-hub body. Titanium, they feel, is their best choice since it is nearly as light as aluminum and has an equivalent strength to many forms of steel. The hubs are made in the USA.
Front and Rear hubs sold separately.
Click here to see all products by White Industries
|
|
|
|
|
| |
|
Shimano Dura-Ace FH-7850 32-Hole Rear Hub
Three key words have emerged as the theme for the latest DURA-ACE system: Speed, Smooth and Strength.
Speed and Smooth result in effortless shifting, improved braking operation, enhanced ergonomics and an attractive feeling and design. Strength is focused on the critical need for lightweight without sacrificing rigidity, durability or precision. "100% Power Transmission" is the goal pursued by the fusion of these three concepts.
Lance Armstrong used Dura-Ace to win the Tour de France seven consecutive times.
• New freehub body design with quicker pawl engagement (up to 125% quicker than FH-7801)
• Titanium freehub body and aluminum axle for super lightweight
• 8/9/10-speed compatible
• Junior gear combination combatable
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Sette Flopak Hydration System
Sette Flopak Hydration System - Low Profile Lightweight Versatility
Short hop or training ride the Sette FloPak is perfect for quick jaunts by road or trail. There is plenty of room for keys, wallet and food bars with two large side pockets and full length pocket on the rear. There is also a cinch tied elastic web on the back for additional storage. To add to the FloPak’s versatility there is a pocket and headphone port for MP3 and CD players which only Setté offers - so you can take your music with you on the move.
The Sette Flopak Hydration System is part of the comprehensive range of Sette Products that Pricepoint carries including: | |
Site Index
