| |
|
Sette APX Carbon Road Seatpost
Look no further for relief from those long road rides. Carbon fiber absorbs vibration better than any other material all while being exceptionally light weight. High-end seamless carbon fiber tubing provides worry free durability and performance. The CNC machined dual rocker bolt clamp is extremely strong and provides a wide range of micro adjustability.
Click here to see all products by Sette
|
|
|
|
 |
|
|
|
|
| |
|
Thomson Layback Seatpost
Thomson Layback Seatpost is over 40% stronger on the ultimate strength test than the strongest production seatposts on the market. Over double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight, allowing higher strength at low weights. Natural ellipse bore inside tube for optimum strength to weight ratio. We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most brand-x seatposts have grip lengths of .500 inch or more shorter than our grip length. The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All brand-x seatposts we tested - every one of them - failed in catastrophic failure with the seat and clamp components - and sometimes pieces of the tube and head - flying off in all directions. This type of failure would dump the rider. The Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Remember all brand-x posts we tested flew apart at less than 150 foot-lbs of torque. Under severe impact the Thomson seatpost would bend slightly and allows the rider to come to a safe stop or finish the ride. The ride could continue.
Every component of the Thomson seatpost is 100 percent American made. This includes all fasteners and forgings. The Thomson seatpost has all parts captive and can easily be attached to a seat without disassembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps - no seat interference - swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Every production lot of seatposts will have ultimate strength and fatigue tests performed. Our on going testing program insures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps - clamps, head, and assembly will spread and flex on impact to protect seat, rails, seatpost and rider. Adjustments can be made to the tilt of the seat without moving the seat forwards or backwards. Easy on seats - allows seat to survive heavy impact loads without bending rails.
|
|
|
|
|
| |
|
Cane Creek Thudbuster LT 3G Seatpost
Cane Creek Thudbuster LT 3G Seatpost - Ride Faster, Longer, and Stronger
By adding the Cane Creek Thudbuster rear suspension you’ll ride faster, longer, and stronger with better traction, more control, and less fatigue. The performance, relative low weight, and simplicity make it the best suspension upgrade you can make to your hardtail. Based on a patented parallel-linkage design, the Cane Creek Thudbuster LT provides up to 3 inches of active stiction-free travel. Unlike telescoping suspension posts, there is no initial stiction to overcome—the suspension mechanism works in the direct path of the natural travel of the rear wheel. The elastomers provide the compression and rebound damping, and can be easily exchanged to tune the suspension.
|
|
|
|
|
| |
|
FSA FR 200 Seatpost
The FSA FR 200 Seatpost features a Zero set-back for maximum strength-to-weight ratio. It is freeride strong but road / XC light. Featuring a 1-piece mast and head that is super-durable, 3-D Forged and CNC machined AL2014, quadruple-butted shaft, and DATA™ (Dual Adjust Tilt Angle) security system.
M5 chromoly and stainless steel hardware.
 Click here to see all products by FSA Full Speed Ahead
|
|
|
|
|
| |
|
Race Face Evolve XC Seatpost
Race Face Evolve XC Seatpost features an innovative, patent pending head design which offers maximum adjustability while minimizing weight.
HEAD:
• Forged from 6061 aluminum, the seatpost head is incredibly
strong and fatigue resistant.
• Patent pending head design is lightweight and distributes loads
more efficiently than conventional seatpost head designs.
• Offers unprecendented adjustibility - with infinite tilt adjust
ment completely independent from the fore/aft adjustment.
• The head accomodates 7mm and 8mm rails while providing 35mm of rail support.
• Features a 0.5" rearward offset.
TUBE:
• Oval tubing optimizes strength to weight ratio and provides
consistently high strength throughout the length of the tube allowing you to clamp the post down at any height.
• The 3d forged 2014 heat treated aluminum tube is anodized and shot peened for increased fatigue life.
EVOLVE – Use Specific Value Components: The evolution of mountain bike components for the budget minded rider – the Evolve line bears little resemblance to anything on the market. Bringing the same Race Face designs, proprietary performance features and stringent quality testing found on Race Face’s ultra high end products to the masses at a more sensible price, the Evolve line is your best choice if you’re looking for Race Face performance products without the performance price tag.
Click here to see all products by Race Face
|
|
|
|
|
| |
|
Easton EC70 Carbon Seatpost 2007
The Easton EC70 Carbon Seatpost 2007 features Easton’s cutting-edge composite technology coupled with our TaperWall process that sets the new standard for light weight and strength in seat post design. Also Featuring new multi-adjustable, lightweight head design with 21 degrees of angular adjustability, Relief-Area Design (RAD) for over-clamping protection,
superior fatigue and impact strength, and limited 5-year warranty.
 Click here to see all products by Easton
|
|
|
|
|
|
|
|
|
| |
|
Easton EA50 Seatpost
Easton’s most affordable aluminum seat post for the enthusiast on a budget. The Easton EA50 Seatpost features an integral multi-adjustable, lightweight head, Easton EA50 aluminum,
cold forged, integral CNC-machined head, and heat-treated Cr-Mo bolts.
|
|
|
|
|
| |
|
Gravity Dropper Classic Seatpost
Want to descend faster and with more control? The single best way is to lower your seat. You will feel an immediate change in the way your bike handles. Lowering your center of gravity means better balance, more control, and more confidence, which gives you the ability to go faster. Ride sections you've only walked before...Maintain speed in sections you've backed off in the past...Extra safety on downhill and tactical sections.
When raised, the Gravity Dropper Seatpost provides the most efficient position for climbing and all level terrain. To deliver maximum power to the pedals, you must have your seat in a raised position. Many bikers compromise their seat height for more technical riding. For example (keeping seat height of road bike higher than their mountain bike). With GravityDropper, there is no compromise. Seat High for power and climbing. Seat low for descending. With GravityDropper, it takes a fraction of a second to raise or lower your seat.
Approach the descent, push the switch on your handlebar, and sit on the seat. Your seat is now locked four inches lower. To raise, push the switch and sit up. There is a cable that goes from the unit on the post to your handlebar. The Gravity Dropper's Patent Pending design is mechanical. There are no seals to blow and no oil to leak. It is an enclosed unit which minimizes dirt and mud entering. Moving from one position to another is done in a fraction of a second.
|
|
|
|
|
| |
|
USE XCR Suspension Seatpost w/ Sumo Clamp
The USE XCR Suspension Seatpost comes with the SUMO clamp. With chunky looks and burley design in a super strong package, the SUMO XCR seat post is engineered to take a pounding and go the distance. The highly acclaimed, quick fitting, simple to adjust clamp design ensures the perfect saddle position. The USE XCR Suspension Seatpost features Full aluminium construction - laser etched, Graphics - Laser etched tough and durable, Head / Clamp - Extruded (except the bolt on the clamp) 7075 T6 Aluminium, CNC'd 7075 T6 Aluminium, Strong and lightweight materials, Anodized Aluminium parts - up to 45 microns, and 3M bonding techniques and methods.
|
|
|
|
|
| |
|
SDG I-Beam Seatpost
The SDG 2014 Aluminum I-Beam Seatpost offers tilt positions in 5-degree increments. Additional positions are possible. Leave post in bike and take off clamps completely. Move clamps to opposite sides of post and reassemble. Clamps work well in either direction.
FOR USE WITH I-BEAM SADDLES ONLY!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Titec El Norte Expert Seatpost
Titec El Norte Expert Seatpost sports a revolutionary design that offers 360 degrees of saddle adjustment. Inspired by four-bolt stem clamps, the El Norte lets a saddle swivel in the seatpost like a bar in a stem. Stop struggling with tedious micro-adjust systems or the limitations of a one-bolt clamp. Even the slackest seat angles are no problem for the El Norte post.
 Click here to see all products by Titec
|
|
|
|
|
| |
|
Race Face Evolve DH Seatpost
Based off the wildly successful Diabolus post - the industry’s first DH/Freeride specific seatpost, comes the value oriented Race Face Evolve DH Seatpost. Designed specifically for abusive riders on a budget, the Evolve DH can soak up the hits of a World Cup DH course without breaking the bank.
· CNC machined from 6061 aluminum, the upper seatpost head is incredibly strong while keeping the weight at a respectable level.
· Proven dual bolt, multi-adjustable head design is based on our highly popular Diabolus post.
· The lower seatpost head is integrated into the tube for increased strength.
· Manufactured from 6061 aluminum, the seatpost tube is shot peened for high impact strength and fatigue resistance.
· Our 3D forging process maximizes the strength to weight ratio of the tube.
· Proven dual bolt, multi-adjustable head design is based on our highly popular Diabolus post.
EVOLVE – Use Specific Value Components: The evolution of mountain bike components for the budget minded rider – the Evolve line bears little resemblance to anything on the market. Bringing the same Race Face designs, proprietary performance features and stringent quality testing found on Race Face’s ultra high end products to the masses at a more sensible price, the Evolve line is your best choice if you’re looking for Race Face performance products without the performance price tag.
Click here to see all products by Race Face
|
|
|
|
|
| |
|
Sette Ryde ST-525 Coil Suspension Seatpost
Sette Ryde ST-525 Coil Suspension Seatpost provides just that extra bit of comfort when the road gets rough. Constructed out of durable 6061 T6 forged aluminum, the 525 is built tough. It features a coil spring dampening system with two inches of travel, and an adjustable preload. It's single bolt micro-adjust seat clamp will adjust to fit a wide range of seat rails and has the ability to accommodate a variety of seat angles.
Click here to see all products by Sette
|
|
|
|
|
| |
|
Sette Ryde ST-900 Air Suspension Seatpost
Need a little extra comfort for those long days in the saddle? Then the Sette Ryde ST-900 Air Suspension Seatpost is your savior. The Ryde 900 features a plush two inches of travel all controlled by an adjustable air suspension design, which allows its user to adjust compression via a schrader valve. A bullet proof 6061 T6 aluminum shaft will insure miles of trouble free use.
Click here to see all products by Sette
|
|
|
|
|
| |
|
Sette Ryde ST-850 Suspension Dropper Seatpost
Before, hand lowering your seat meant getting off your bike fumbling around with a quick release or digging through your pack for your tools. Well, those days are long gone with the Sette Ryde ST-850 Suspension Dropper Seatpost. The 850 features an easy to use control lever, tucked away under your seat, that will allow it's user to raise or lower their seat all in a matter of seconds. Adjustments can be made on the fly for those technical sections of the trail where having a lower seat height adds the benefit of more maneuverability for clearing obstacles. Constructed out of forged 6061-T6 aluminum, the 850 seat post is designed to give seasons of trouble free use.
Click here to see all products by Sette
|
|
|
|
|
| |
|
Syntace P6 Seatpost
The more intelligent choice.
Syntace P6 Seatpost is the first seatpost that is easy on the seat and the user with a really useful range of adjustments. Adjust backwards - like a bent seatpost…and forward: like a straight seatpost. The Syntace Extended Seat Adjustment design offers lots of adjustability back and forth. The key: only the stop-edge offset in relation to the middle axis defines the real offset of a seatpost, so we made the upper clamping part of the Syntace super-narrow. Because the further back the limiting Stopp-edge is located, the further you can slide back your seat.
The asymmetrical backwards extended Syntace ERS seat support - Extended Rail Support - offers lots of support for the seat rails. With these far extended ERS booms it is finally possible to use seats with light titanium rails off-road - without bending or breaking them.
The two-bolt micro adjust is simply the best AND most precise angle adjustment. In the Syntace P6 we combine it with the best accessibility of bolts and real 40° pivoting range.
The cold-forged 3D head is already positioned horizontally (contrary to extremely expensive “simple constructions”). And: the bolts are positioned absolutely symmetrical, exactly in the direction of force. This way it stays bomb-proof even under high loads with
less weight. The most elaborate carbon-fiber seatpost on the market. FEM as well as extreme runs on a testing machine (VR-3 SP-approved) lead the way to a new and load-oriented material distribution. All parts of the head are cold-forged from 7075 aluminum, deep ribbed and coupled through „cardanic“ ellipsoid anchors. It is not easy to manufacture but makes the Syntace P6 seatpost light and incredibly sturdy. Just the way you are used to from Syntace. Thanks to the scale covered by an epoxy coat you will find again the correct seat height after a downhill with lowered seatpost.
|
|
|
|
|
|
|
Site Index
