| |
|
Alligator Super Fortress Cable Kit
Alligator Super Fortress Cable Kit is a lightweight double-jacketed compressionless housing fortified with stainless steel wire mesh for durability. This brake and gear cable kit features ultra low-friction pre-stretched sleek PTFE coated cables. The flat surface of these cables gives maximum precision and smooth operation.
This kit is highly recommended for all cable-actuated (mechanical) disc brakes, as well as direct pull brakes.
The Super fortress kit is available for either brakes or shifting.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
 Click here to see all products by Alligator Cables
|
|
|
|
 |
| |
|
Alligator The Gripper Bolt-On Hydraulic Hose Guide
Alligator The Gripper Bolt-On Hydraulic Hose Guide is the ultimate method for securing hydraulic disc brake tube to frame or fork. The Gripper™ fits to standard cable housing mounts on the bike frame and can be used to retain hydraulic disc brake hose up to 6mm in diameter securely in place.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Each pack contains two clips.
Click here to see all products by Alligator Cables
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Alligator PTFE Galvanized Cable
Alligator PTFE Galvanized Cables are thermo bonded to greatly improve performance and reduce friction. Cables are pre-stretched for precise shifting and braking. These cables are also self-lubricating, weather-proof and low-maintenance.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
|
|
|
|
| |
|
Alligator 5mm Sealed Shifter Housing
Alligator 5mm Sealed Shifter Housing provides top performance pre-lubed, sealed compressionless housing with sealed ferrules. It's designed so that contaminants don't enter the cable system. Additionally, the system is lined with a polyethylene inner for low friction and efficient shifting.
Available in 600mm length.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Alligator iLink Cable Set
Alligator iLink Cable Set
Alligator iLink Cable Set is 50 percent lighter than conventional cables. INTERLINK alloy housing technology for precision. ULTRAGLIDE predex P.T.F.E. coated cables for linear response. Polymer liner for friction-free performance. Compatible for both brakes and gear.
Features:
- P.T.F.E. coated cables
- Pre-stretched Slick cable
- Enhance smooth shifting & braking by reducing friction
- Self-lubrication
- All weatherproofing
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Gore Ride-On Sealed Low Friction Cable System
Gore Ride-On Sealed Low Friction Cable System completely protects from the elements with continuous liner and GRUB™ Seals. Patented cable coating technology designed for low friction and durability. Works with most brakes or shifters on most bikes. GORE™ RideOn® Cable Systems demonstrated significantly lower friction than competitive cables for the duration of the test.
|
|
|
|
|
| |
|
Jagwire Alloy Stick-On Housing Guide 3-Pack
Jagwire Alloy Stick-On Housing Guide 3-Pack uses a 3M adhesive to allow you to apply cable guides to your frame any place you see fit. Weighing less than a gram each, you'll never notice a difference in weight.
|
|
|
|
|
|
|
|
|
| |
|
Alligator Bullet Proof Cable Kit
Compressionless housing structure strengthened with an aluminum spiral shell and reinforced with braided Kevlar fiber for durability and reliability.
This gear / brake cable kit features ultra low friction stainless steelbSleek P.T.F.E. coated cable combined with pre-stretched slick cable that has a flat formed surfacing for maximum precision and friction free performance.
Highly recommended for cable actuated disc brakes as well as direct pull brakes and compatible with all derailleur system.Available for mountain and road bikes for both brakes and derailleur.
FEATURES:
- Compressionless housing for dependability.
- Strengthend with aluminum spiral shell.
- Reinforced with Kevlar fiber.
- Stainles steel P.T.F.E. coated cables.
- Enhance smooth shifting&braking by reducing friction.
- Self-lubrication.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables |
|
|
|
|
| |
|
Alligator Sleek Glide Cable Kit
Gold/silver mesh braided fiber with compressionless housing structure for precision shifting and high carbon steel spiral housing for increased structural rigidity delivers responsive braking action.
Combined with sleek (P.T.F.E.) coated ULTRA low cables.
Available for mountain and road bikes for brakes & gear.
FEATURES:
- P.T.F.E. coated cables
- Enhance smooth shifting &braking by reducing friction.
- Self-lubrication.
- All weatherproofing.
- Front cable: 1500mm/59in, Rear cable: 2000mm/78in
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Alligator Ultimate Hydrahose Hydraulic Hose Kit
On Sale Now!
Was $24.98
Now $17.98
Alligator Ultimate Hydrahose Hydraulic Hose Kit
High quality replacement hydraulic brake hose made from a from a very flexible polymer underlay reinforced with Kevlar fiber and AISI 304 stainless steel. A scratch resistant transparent coating protects both the housing and your frame.
Alligator Ultimate Hydrahose has a temperature range of -40C - +160C and a minimum bursting strength of 9000psi.
Included along with the hose is all the necessary hardware and fittings (banjo fittings, bushings, o-rings, etc) to install the hose on the brake models listed below. And don't sweat, instructions are included as well.
Please note: If your make and model of brake is not listed we cannot guarantee compatibility.
Length: 3000mm
Outer Diameter: 5mm
Weight: 80g (uncut)
This kit fits the following brakes as per Alligator*
Coda: All
Formula: Evoluzione Series, B4
Hayes: All
Hope: XC4, DH5 Open 2, Closed 2
Giant: MPH
Grimeca: System 8
Magura: Louise, Clara Julie, Gustav M, Climb 8, Navigator
Shimano: XT and Deore
*If your make and model of brake is not listed we cannot guarantee compatibility.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Alligator Colored Brake Housing
Alligator Brake Housing 30 Meter Roll
High quality steel coil wrapped compression-less (linear) brake housing with an inner liner for smooth cable movement. The exterior has an added clear layer to aid in scuff protection and the 30 meter length (98.4 feet) will make you the most popular home mechanic in your neighborhood.
Housing measures 5mm in diameter.
Please note: Ferrules and other related hardware are NOT included.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Alligator Cable Housing Ferrule 50 Pack
Alligator Housing Ferrule 50 pack
It's the little details that make all the difference and the Alligator Housing Ferrules enable you to add some functional style in an often overlooked spot. The Ferrules are anodized for durability and are lined at the cable exit to help keep muck and grime at bay.
Ordering a quantity of 1 will get you 50 ferrules of a single color packaged in an easy access plastic jar.
Fits: 5mm Housing/1.75mm max cable diameter
Total Length: 17.5mm
External Diameter: 6.3mm (wide end) 5.7mm (narrow end)
Weight: 0.42g each
Quantity: 50
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Alligator Cable O-Rings 100 Pack
Alligator Cable O-Rings Jar of 100
O-Rings, donuts, doesn't matter what you call them, these little gizmos serve two very useful purposes.
1) They prevent your frame from being scratched by the cables.
2) By keeping the cables off your frame, things will be little less noisy since there won't be any cables to "ping" off your frame when you're riding through the rough stuff.
These donuts fit both brake and shifter cables. 100 are included in each jar which means you get 300 individual donuts once you separate them.
A three donut section weighs 0.25 grams.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Alligator Cable End Caps 100 Pack
Alligator Cable End Caps Jar of 100
These high quality anodized caps will keep the ends of your cables nice and tidy. Alligator End Caps fit both brake and shifter cables. They are packaged in a flip top jar for quick access.
Total Length: 12mm
Cable Opening: 2mm
Weight: 0.11 grams (per end cap)
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Alligator Barrel Adjuster w/Spring
Alligator Alloy Barrel Adjusters
If you've got a road frame with threaded cable guides on its down tube, the Alligator Alloy Barrel Adjusters are just the ticket to add a little functional flair to an often overlooked spot.
A pair of adjusters including springs weigh just five grams.
Ordering a quantity of one will get you 20 adjusters and springs (10 pairs) packaged in an easy access jar.
Due to manufacturer restrictions we can only ship Alligator Products to US and Canada.
Click here to see all products by Alligator Cables
|
|
|
|
|
| |
|
Shimano Dura-Ace Shifter or Brake Cable Set
Shimano Dura-Ace Cable and Housing Set
choose between a Shimano Road Brake Cable Set or a SIS Shift Cable Set
SIS-SP41 Characteristics:
The SIS-SP41, being pre-lubricated with the special silicon grease inside the outer casing, decreases the resistance inside the outer cable significantly (about 10 percent in comparison with the previous model) and achieves an intuitive, quick and precise shifting performance.
SIS-SP41 Shift Cable Set Includes:
- Outer Casing: 4mm diameter, 600mm x 2 / 320mm x 1
- Stainless Steel Inner Cable: 1.2mm diameter, 2000mm x 2
- Outer Cap and Inner End Cap Included
Road Brake Cable Set Includes:
- Outer Casing: 5mm, 1400mm x 1 / 800mm x 1
- Stainless Steel Inner Cable: 1.6mm, 1700mm x 1 / 1000mm x 1
- Outer cap and Inner End Cap Included
 Click here to see all products by Shimano
|
|
|
|
|
| |
|
Shimano Dura-Ace Cable/Housing Stainless
Shimano Dura-Ace Road Brake/Shift Cable Set
The best fit for Shimano components although they will work with all other road brakes as well. The brake cable set includes one 1400mm long housing (5mm wide), one 800mm housing, one 1000mm long 1.6mm wide stainless cable, one 1700mm stainless cable, two cable crimps, and two ferrules. Sealed from the elements. The brake cable end fits road bike levers only. Gray housing. 178 grams uncut.
SIS Shift Cable Set
Includes:
- SIS-SP Outer Casing: 4mm, 600mm x 2 / 320mm x 1
- Stainless Steel Inner Cable: 1.2mm, 2000mm x 2
- Outer Cap & Inner End Cap Included
Click here to see all products by Shimano
|
|
|
|
|
| |
|
Shimano XTR Shift Cable and Housing Set
Shimano XTR Shift Cable and Housing Set
This is for Shimano XTR shifters. Fluorine-coated, recuded-friction stainless inner cable provides precise shifting performance.
Includes:
- SIS-SP41 Outer Casing: 4mm, 600mm x 2 / 340mm x 1 / 300mm x 2
- Stainless Steel Coated Inner Cable: 1.2mm, 2100mm x 2
- Sealed Outer Cap and Rubber Shield / Inner End Cap Included
Click here to see all products by Shimano
|
|
|
|
|
|
|
|
|
| |
|
Jagwire Mini Inline Cable Adjusters
Jagwire Mini Inline Cable Adjusters
Fine tune your bike's shifting on the fly with Jagwire's Mini Inline Cable Adjusters. This little guys can mount either near the shifter (if you have older style Shimano STI levers with external cables) or into the cable guides on your frame's head tube.
- A complete set weighs a paltry 10 grams.
- Intended Use: Road
- Compatibility: Shimano, SRAM, Campagnolo
- Total weight: 10g
- Available colors: Black, White, Titanium
|
|
|
|
|
| |
|
Jagwire J2 Inline Cable Adjusters
Jagwire J2 Inline Cable Adjusters
The J2 is a sleek update on traditional cable adjusters. It features a user friendly indexed adjustment wheel at the center of the adjuster. If you have older Shimano STI levers with external cables, the J2 can be mounted near the shifter. Otherwise mounting them at the head tube cable guides would be the way to go.
- A complete set of J2 cable adjusters weighs 19 grams.
- Intended use: Road
- Compatibility: Shimano, SRAM, Campagnolo
- Total weight: 19g
- Available colors: Black, White, Titanium.
|
|
|
|
|
| |
|
Tektro Steer Tube Cable Hanger 1 1/8 with Guide
Tektro Steerer Tube Cable Hanger 1 1/8 with Guide
This is a pretty straightforward part- a cable hanger that would take the place of a spacer under your stem. The cable guide features a liner to reduce friction. Hup! Hup!
Intended use: CX/touring bikes/anything with old school cantis
Fits: 1 1/8 steerer tubes
Stack height: 8mm
Drop from bottom of spacer: 30mm
In-house measured weight: 36g
 Click here to see all products by Tektro
|
|
|
|
|
|
|
|
|
| |
|
Shimano Full Length 4mm Shift Housing/Cable Set
Shimano Full Length 4mm Shift Housing/Cable
Original Shimano shift gear cable set with high-quality SIS OT SP41 outer casing, sealed end caps and sleeves. The inner wires are coated. The outer casing is long enough to line it in several parts to the front and rear derailleur.
Features:
- Sealed end caps and sleeves
- High-quality SIS OT SP41 outer casing
- Coated inner wire
- Grey
Click here to see all products by Shimano
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Shimano Ultegra Di2 Wireing Kit
Shimano Ultegra Di2 Wireing Kit
Ultegra Di2 wiring kits represent an improvement over first generation Dura-Ace Di2 wires because Ultegra Di2 use smaller 2 core wires instead of the 4 core used on first generation. Ultegra Di2 wires are compatible for both internal and external routing so there is no need to buy separate internal or external kits.
Features:
- Smaller 2 core wires
- Snap-in waterproof connection
- Compatible for both internal or external routing
Click here to see all products by Shimano
|
|
|
|
|
|
|
|
|
| |
|
Shimano Ultegra Di2 Short Battery Mount
Shimano Ultegra Di2 Short Battery Mount
The Shimano Di2 SM-BMR1-S battery mount is the external short battery mount that attaches to a 40mm Di2 specific mount typically located on the chain stay on framesets specifically designed to be Di2 compatible. Battery sold separately.
Features:
- 30 grams
- Attaches to Di2 battery mount
Click here to see all products by Shimano
|
|
|
|
|
|
|
|
|
| |
|
Shimano Ultegra Di2 Jucntion Box
Shimano Ultegra Di2 Jucntion Box
The junction box connects the wires from the rear derailleur, front derailleur, battery, and shift levers together. There are two types, externally mounted and internally mounted to the frame.
Features:
- 10 grams
- Joins all 4 connecting wires
- Externally mounted (Shimano Part# SM-JC40)
- Internally mounted (Shimano Part# SM-JC41)
Click here to see all products by Shimano
|
|
|
|
|
|
|
|
|
| |
|
Shimano Dura-Ace Di2 Battery
Shimano Dura-Ace Di2 Battery
The Shimano Di2 battery is a 7.4V, high performance Lithium Ion battery designed to deliver reliable, long life even in the worst conditions. In conditions requiring consistent and frequent shifting, the battery is capable of 1000 kilometers of use.
Click here to see all products by Shimano
|
|
|
|
|
|
|
|
|
